Cel-Fi by Nextivity QUATRA 1000 Enterprise Cell Signal Booster System


Free Standard Shipping FREE Standard Shipping*
Cel-Fi Quatra 1000 - Boosters
  • Coverage up to 200,000 sq ft.
  • +100 dB gain for any US single carrier
  • Digital Hybrid DAS system
  • No monthly fees or WiFi required
  • Uses Cat5 cable for simple cable runs

Options Available:

This enterprise product cannot be sold online. The final price depends on configuration. Contact our signal experts and we can help you design the most cost-effective solution tailored to your specific requirements.
Or call our experts directly Mon-Friday 8AM-5PM CST.

Improve Your In-Building Cellular Signal Immediately

Installing a enterprise cell signal booster system requires a professional's touch. Our team of signal experts will make sure you get coverage where you need it. We have improved indoor cellular coverage in millions of square feet for some of the largest companies in the world.

Speak to an Expert 1-800-420-3211
Installation Team
Installation Solution
Installation Scheduling
Installation Satisfaction
Guaranteed Customer

Best Single Carrier Booster. Period.

The Cel-Fi QUATRA 1000 is the most powerful single-carrier enterprise signal booster in the world. Period. It massively improves 4G, 4G LTE and 5G signal throughout your whole building, across all major American carriers. Cover your entire building up to 200,000 square feet in strong cell signal for any individual carrier. Great for large enterprise spaces like office buildings, hospitals, retail stores and indoor venues.

More Power

Cel-Fi is the only single-carrier signal booster brand on the market. Because of this, they offer more gain than their competitors. Enjoy boosted signal up to +100 dB, which is a difference of +30 dB or up to 1000x more power compared to other boosters. No other enterprise-grade booster gives you this much gain over this much space.

Digital DAS Hybrid System

The QUATRA 1000 works with a hybrid system consisting of two elements. The entire system is digital, including the cabling, allowing for better signal transfer. The primary or Network Unit draws in outside signal and sends it via Cat5 or Cat6 cables to each Coverage Unit. From there the Coverage Units (CU) broadcast the signal throughout your office space. Each CU supplies signal to the immediate area both horizontally and vertically. This means that a CU can create a coverage bubble that will go through floors.

Complete Kit and Digital Cabling

The QUATRA 1000 is a complete kit, with network unit, coverage units and cabling included. It is designed to be installed in days instead of weeks like other brands. The Cat5 cabling allows PoE (Power over Ethernet), meaning that the coverage units receive their power directly from the network unit. No extra power source is needed. Now you can run longer, simpler cable setups and still have great signal even deep inside your building.

Remote Management

Cel-Fi's free cloud-based WAVE app allows you to manage and control your QUATRA system from anywhere. Simply log into the app using a computer, or even your phone, and create alerts, change settings, or update software. The QUATRA is designed to be a powerful, comprehensive enterprise signal booster system that is easy to install and does exactly what you need it to.

How a Cel-Fi Quatra System Works

Product Details

The Cel-Fi QUATRA 1000 is an all-digital hybrid DAS single carrier signal booster system. The system includes Network Units (NU) and Coverage Units (CU). The network unit sends signal to the CU via digital cabling that doubles as a PoE source. Set up your CUs anywhere you need to without worrying about getting them powered. The CU uses traditional dome or panel antennas to spread the amplified signal throughout their range. Six coverage units can be supported at one time. One 1000 NU can support up to 6 CUs for a maximum coverage area up to 75,000 sq ft. Four Cel-Fi QUATRAs–with support up to 24 CUs–when connected to a small cell can provide unified coverage up to 200,000 sq ft.

The QUATRA 1000 offers +100dB, which is more than +30 dB or up to 1000x more power compared to other boosters. You can rest assured that your entire building will be covered in good strong signal. Although the QUATRA 1000 is a single carrier system, you can change your carrier on the WAVE app. Cat5 cabling has less signal loss, making the QUATRA 1000 the perfect choice for larger buildings and long cable runs. Cat5 also supports PoE, allowing you to run power to your coverage unit from anywhere.

Set up, control, manage and more with the WAVE app. WAVE is cloud-based and can be accessed from anywhere. You can set up alerts and alarms, change settings, or just make sure that everything is ticking along as it should with just your phone.

  • Scalable All-Digital PoE Cat5e Active DAS Hybrid for “Middleprise,” buildings between 20,000 and 200,000 sq ft.
  • Works for all phones & cellular devices on AT&T, Verizon, or T-Mobile (select your own carrier.)
  • Power-over-Ethernet for easier installation
  • Cat5/Cat6 Cabling for better signal quality
  • Virtually eliminates dropped calls
  • Crystal clear voice quality
  • Faster internet data (uploads, downloads, and streaming)
  • Wider coverage area & Improved reception
  • Consistent service throughout the office
How Does It Work
  1. The outdoor antenna draws in signal from nearby towers and sends it to the network unit.
  2. The network unit then sends the signal through the Cat5 cables to each coverage unit. Power is sent via PoE from the network unit to each coverage unit.
  3. The coverage unit then boosts the signal up to +100 dB, sending it through floors and walls to eliminate dead spots.
Who is it for?
  • Large office buildings
  • Hospitals
  • Retail spaces
  • Multistory buildings
  • Enterprise spaces
Technical Specifications

At Signal Boosters we provide full turnkey integration of in-building wireless (IBW) systems that amplify signal indoors, delivering the signal you need to get the job done. From the first call to post-project, Signal Boosters handles every detail personally in-house. Our team of RF engineers, system integrators, designers, and certified signal boost specialists take complete ownership of your project.

  1. Assessment - Pre-survey - Site survey
  2. System Design - Data analysis - Floor plans - Equipment & Pricing
  3. Installation - Installing equipment - Optimization
  4. Support - Documentation - Monitoring & support

Frequently Asked Questions

Can the QUATRA 1000 be set up outdoors?

No. The QUATRA units are not weatherproof and must be set up indoors.

Can you combine both donor antenna feeds?

Yes, if the donor signal is coming from the same direction.

What is the USB on the back of the QUATRA 1000 used for?

The USB on the back of the QUATRA 1000 NU is for the Compass Site Survey Tool and is for Nextivity use only.

Can I make the NU to CU cables more than 330 feet?

Yes. The standard Cat5e cable length maximum is 330 feet, or 660 feet if a QUATRA Range Extender is used halfway along the cable length. 490 feet (984 feet with a QRE) is possible with thicker 22/23 gauge CAT6/7 Ethernet cables.