Find the Right Signal Booster for You
Answer a few questions and we'll recommend the best solution to solve your cell signal problems.
Answer a few questions and we'll recommend the best solution to solve your cell signal problems.
Up to 18 hours of uptime with two included lithium batteries. Get up and running in five minutes or less, with even faster teardown.
Utilize the included weBoost Home Room signal booster and Peplink BR1 Mini CAT7 cellular router for portable cellular and internet on-the-go. Plug it in or run it off battery*.
Battery charger sold separately*
Equipped with the weBoost Home Room Signal Booster, enhance cellular signals by up to +60 dB for all nearby devices using any US carrier anytime, anywhere.
Keep up to 60 internet-dependent devices connected with the Peplink BR1 Mini CAT 7 Cellular Router. Delivers speeds up to 300 Mbps down and 150 Mbps up. Dual-SIM allows always-on connectivity.
Traveling salespeople. Inspectors. Remote job sites. Agricultural workers. More. Everyone needs reliable cellular and WiFi. The PSU provides.
This weBoost Edition of the revolutionary Bolton Technical Portable Signal Unit (PSU) is a wideband, complete cellular and WiFi package. It pairs the weBoost Home Room cell signal booster and Peplink BR1 Mini CAT7 Cellular Router to provide crisp cellular and up to 300 Mbps of download. The PSU can be plugged in for long-term use or powered for up to 18 hours by the included lithium batteries.
The PSU is available in different versions to fit any situation. This is the weBoost edition, including a weBoost Home Room system. The Home Room provides up to +60 dB of gain across all cellular frequencies simultaneously.
The included Peplink BR1 Mini CAT7 cellular router benefits from the amplified signal provided by the booster. Performance will be significantly better than what a portable hotspot provides. Up to three wired devices and multiple wireless devices can connect to the internet at once with speeds up to 300 Mbps. Its dual-SIM functionality will keep you connected across any carrier network.
So easy to set up, you'll be good to go in minutes. Built-in LED lights further simplify set up and take down in dark spaces.
Standard with two M18 lithium batteries, the PSU offers up to 18 hours of operation. Built-in USB ports and a power strip give you the option to keep additional equipment on. The voltage meter allows for easy battery power monitoring. Use the AC plug socket to power the unit when electricity is available.
For optimal performance, the lid must remain open during operation. To protect all electrical components from the elements, place the PSU in a secure area. If you plan to use the included batteries regularly, we recommend purchasing a charging cable (sold separately).
The PSU is powered by M18 lithium batteries, or by an external power source. When turned on:
ROUTER STUFF | |
---|---|
Manufacturer | Peplink BR1 Mini CAT7 |
Number of Ports | WAN = 1x 10/100M Ethernet Port + 1x Embedded LTE Modem with Redundant SIM Slot. LAN = 1x 10/100M Ethernet Port |
Port Speeds | 1 Gbps |
Peek Data Speeds | DL 300 Mbps, UL 150 Mbps |
Technologies | CAT7 LTE |
Dimensions | 4.6 x 4.2 x 1.4 inches |
Sim Capabilities | Dual |
Antennas | 1x GPS Antenna (ACW-232), 1x Wi-Fi 2.4G Antenna (ACW-304), 2x LTE Antenna (ACW-813) |
BOOSTER STUFF | |
Manufacturer | weBoost 472120 |
Frequency Bands | 2, 4, 5, 12, 13, 17 |
Gain | 60 decibels (dB) |
Impedance | 75 Ohm |
Input Power | 110V - 240V |
Connector Type | SMA |
Dimensions | 6.5 x 1.25 x 4.25 inches |
Weight | 0.4 lbs |
Booster Color | Black & Grey |
WHATS IN THE BOX | |
Protective Case | Pelican |
Cellular Router | Peplink BR1 Mini CAT 7 |
Signal Booster | weBoost Home Room |
Panel Antenna (Indoor) | 50 Ohm |
Yagi Antenna (Outdoor) | 50 Ohm |
WiFi Antenna | 2x Whip |
BOX DIMENSIONS | |
Weight | 45 lbs |
Dimensions | 24" X 15" X 18" |
Case Color | Black |
LEGAL STUFF | |
Router FCC ID | N7NMEM74B |
Booster FCC ID | PWO460020 |
FCC NOTICE:
This is a CONSUMER device. BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider's consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person. You MUST cease operating this device immediately if requested by FCC or a licensed wireless service provider.
For assistance, please call us at 1-800-470-6777.
If you want reliable cellular and WiFi connectivity on the job or out in the world, the PSU will provide it. There are many reasons to consider the PSU:
To name a few. It gives great internet and cell phone service, where you need it, when you need it, with few if any compromises. What’s not to love about that?
Use the PSU anywhere cell signal is available, even if faint. Applications include trade shows, off-the-grid living or camping, command centers, temporary job sites, pop-up shops, and more.
You'll get the best results when used indoors, but even outdoors you will receive some signal as long as you remain near the PSU.
Yes. The weBoost Home Room Signal Booster and Peplink BR1 Mini Cellular Router both need cellular reception to keep you connected. Having no signal at all will mean the Home Room won’t work, which means the router won’t, either.
The PSU is weatherproof when closed. Dust, water, or hail aren't a match for the heavy-duty case. However, the components inside the case are not weatherproof. Since it must remain open for optimal performance, make sure PSU is in a safe spot when in use.
Three reasons:
The only monthly fee associated with the PSU is the data plan needed to keep the Peplink BR1 Mini online. There are no monthly fees associated with any weBoost or Bolton equipment.