FREE Standard Shipping*
Read Featured Reviews From Actual Customers Read All Reviews
Best for Boosters and IoT
The OMNI-121 is suited for IoT applications as well as cell phone signal boosters. With up to +1.8 dBi this antenna is markedly more powerful than other M2M antennas.
Boosts WiFi Too
The OMNI-121 doesn’t just capture cellular. It also captures WiFi with up to +5dBi. This improves your received WiFi signal by over three times.
Pick your Cable Option
Choose from either 16ft or 26ft HDF-195, SMA-Male terminated cable. This gives you the option for any cable length. Mount your OMNI-121 on your roof even if it's far away from your booster or router.
Compact and Easy to Set Up
The OMNI-121 is compact rugged, and simple to set up. It can withstand many hazardous weather environments, with increased connectivity sensitivity.
The Poynting OMNI-121 is a medium gain omni-directional antenna covering the GSM 900, GSM1800 / UMTS, and LTE frequency bands. It’s simple to set up and comes with two cable options for longer cable runs. Install it on any roof for better cell and WiFi signal.
The OMNI-121 is a cost-effective option for home, office, or IoT. It has several base station capabilities, allowing it to connect to all sorts of devices. Keep your whole network connected no matter where your machines may be, or what signal they work with. Capture GSM network (GPRS/ EDGE/ 3G/ HSPA/ LTE) and 2.4 GHz WiFi.
- Rural or urban application
- Omnidirectional draws in signal from anywhere
- Choose from 16ft or 26ft lengths of low-loss HDF-195, SMA-male terminated
- Small, lightweight, weather and dust-proof. (IP 65)
- Perfect for M2M communications
- Indoors or outdoors use
- Works for any carrier, any country wideband antenna captures any signal you need
- Homes
- IoT
- Business
- Rural applications
- Poynting OMNI-121 Antenna
| Poynting OMNI-121 Antenna | |||
|---|---|---|---|
| Version | A-OMNI-0121-V3 | A-OMNI-0121-01-V3 | |
| Ports | 1 | 1 | |
| SISO / MIMO | SISO | SISO | |
| Coax Cable Type | HDF 195 | HDF 195 | |
| Coax Cable Length | 8m | 5m | |
| Connector Type | SMA (M) | SMA (M) | |
| Weight | 0.57 kg | 0.43 kg | |
| Packaged Weight | 0.72 kg | 0.60 kg | |
| Frequency bands: | 698 – 960 MHz 1427 – 1517 MHz 1710 – 2170 MHz |
||
| Gain (max): | 1.8 dBi @ 698 - 960 MHz 0 dBi @ 1427 – 1517 MHz |
||
| VSWR: | <2:1 across 90% of the bands | ||
| Feed power handling: | 10 W | ||
| Input impedance: | 50 Ohm (nominal) | ||
| Polarisation: | Linear Vertical | ||
| Coax cable loss: | 0.385 dB/m @ 900 MHz 0.507 dB/m @ 1500 MHz 0.565 dB/m @ 1800 MHz 0.666 dB/m @ 2400 MHz |
||
| DC short: | Yes | ||
| Mounting bracket: | Pole up to 50mm diameter Wall and pole mount stainless steel bracket |
||
| Product dimensions: | 553 mm x Ø50 mm | ||
| Packaged dimensions: | 595 mm x 130 mm x 65 mm | ||
| Radome material: | ABS (Halogen Free) | ||
| Radome colour: | Pantone – Cool Gray (1C) | ||
| End cap color: | Pantone - Black RAL - Black |
||
| Mounting Type: | Pole and wall mount | ||
| Wind Survival: | ≤160 km/h | ||
| Temperature Range (Operating): | -40°C to +70°C | ||
| Environmental Conditions: | Outdoor/Indoor | ||
| Water ingress protection ratio/standard: | IP 65 | ||
| Salt Spray: | MIL-STD 810F/ASTM B117 | ||
| Operating Relative Humidity: | Up to 98% | ||
| Storage Humidity: | 5% to 95% - non-condensing | ||
| Storage Temperature: | -40°C to +70°C | ||
| Enclosure Flammability Rating: | UL 94-HB | ||
| Impact resistance: | IK 08 | ||
| Product Safety & Environmental: | Complies with CE and RoHS standards | ||
