Improve Your WiFi And Cell Signal No Matter Where You Are
The OMNI-296 is a cellular and WiFi antenna designed for WiFi access points and point-to-point links. It is compliant with IEEE 802.11b/g/n/ac, as well as being backwards compatible with older WiFi technologies. Get better WiFi performance no matter where your device is situated. It can be used for point-to-point links.
Better Dual-Band Signal
Dual-band WiFi ensures a better connection for your devices. It offers greater range and better speeds than single band. With the OMNI-296 you can boost dual band WiFi to your home, office, or M2M device.
Up to 7.5 dBi of Gain
This antenna boosts 2.5 GHz WiFi by up to +6 dBi or 5 GHz WiFi by up to +7.5 dBi, increasing received WiFi signals by over four times.
Set it Up Anywhere
The OMNI-296 is dust, weather and vandal resistant. You can set it up on a pole or a wall, with everything you need included in the kit. Comes with an N-Type female connector as standard.
The OMNI-296 antenna is a dual-band WiFi omni-directional antenna. It has been created for any WiFi access point and is backward compatible with older technologies.
This antenna has been designed to improve channel saturation and provides better WiFi performance and flexibility. It's perfect for point-to-point links plagued by RF noise and cluttered environments. Get clear signal to your device no matter where it is.
The OMNI-296 is dual-band, covering both 2.4 GHz and 5 GHz. It has a maximum gain of 6 dBi in the 2.4 GHz band and 7.5 dBi in the 5GHz band, offering great performance and reliable signal. It also covers the 3.5 GHz CBRS band, which makes it future proof for 5G technologies that will be available soon. When these are released, you can expect to get up to 7 dBi.
With a durable high resistant plastic housing, you can set up the OMNI-296 in any situation. It is dust, weather and vandal resistant, as well as acid and other chemicals. This makes it a great choice for industrial applications like warehouses and factories. The antenna comes with a N-Type female connector at its base which can be connected to a cable of the desired type and length.
- Good for urban or rural areas
- Up to 7.5 dBi
- Dual band WiFi and 5G compatible
- Increased reliability and speed to all connected devices
- Supports long-range networking
- P2P capable
- For commercial and industrial applications
- Perfect for small businesses, open-cast coast mines, factories, oil rigs, M2M/IoT, and more
- Built for harsh conditions
- Weatherproof, dustproof, high impact resistant, chemical resistant
- Rural applications
- Industrial and Enterprise
- Poynting OMNI-296 Antenna
|Poynting OMNI-296 Antenna|
|SISO / MIMO||SISO|
|Frequency Bands||2400 – 2500 MHz
3400 – 3800 MHz
5000 – 6000 MHz
|Peak Gain||7.5 dBi|
|Coax Cable Type||N/A|
|Coax Cable Length||N/A|
|Connector Type||N-Type (F)|
|Gain (max):||6 dBi @ 2400-2500 MHz
7 dBi @ 3400-3800 MHZ
7.5 dBi @ 5000-6000 MHz
|Feed power handling:||10 W|
|Input impedance:||50 Ohm (nominal)|
|Mounting bracket:||Pole up to 50mm diameter
wall and Pole mount stainless steel bracket
|Product dimensions||485 mm x Ø71 mm (excl. bracket)|
|Packaged dimensions:||510 mm x 95 mm x 95 mm|
|Packaged weight:||0.91 kg|
|Radome material:||ABS (Halogen Free)|
|Radome colour:||Pantone - Cool Gray (1c)|
|Mounting Type:||Pole and Wall|
|Wind Survival:||≤190 km/h|
|Temperature Range (Operating):||-40°C to +70°C|
|Water ingress protection ratio/standard:||IP 65|
|Salt Spray:||MIL-STD 810F/ASTM B117|
|Operating Relative Humidity:||Up to 98%|
|Storage Humidity:||5% to 95% - non-condensing|
|Storage Temperature:||-40°C to +70°C|
|Enclosure Flammability Rating:||UL 94-HB|
|Impact resistance:||IK 08|
|Product Safety & Environmental:||Complies with CE and RoHS standards|