null

Nextivity CEL-FI QUATRA EVO FN Enterprise Cell Signal Booster

80I41-WXCU

Free Standard Shipping FREE Standard Shipping*
Nextivity CEL-FI QUATRA EVO FN Enterprise Cell Signal Booster
  • Scalable all-digital intelligent hybrid DAS for enterprise environments with FirstNet Band 14 support.
  • Dual-carrier capability, can be configured to boost AT&T/FirstNet and another carrier like Verizon or T-Mobile.
  • Maximizes in-building 5G and 4G coverage with industry-leading gain up to 100 dB and IntelliBoost..
  • Adaptable architecture with passive donor antenna or active small cell signal source.
  • View product technical specifications
This enterprise product cannot be sold online. The final price depends on configuration. Contact our signal experts and we can help you design the most cost-effective solution tailored to your specific requirements.
Phone
Or call our experts directly Mon-Friday 8AM-5PM CST.
1-800-420-3211

Improve Your In-Building Cellular Signal Immediately

Installing a enterprise cell signal booster system requires a professional's touch. Our team of signal experts will make sure you get coverage where you need it. We have improved indoor cellular coverage in millions of square feet for some of the largest companies in the world.

Learn more about our Nextivity Cel-Fi Signal Booster Installation Service.

Installation CTA
Speak to an Expert 1-800-420-3211
Installation Team
Certified
Team
Installation Solution
Custom
Solutions
Installation Scheduling
Flexible
Scheduling
Installation Satisfaction
Guaranteed Customer
Satisfaction

Superior FirstNet Connectivity

The CEL-FI QUATRA EVO FN hybrid DAS significantly enhances FirstNet Band 14 connectivity throughout enterprise and government buildings, ensuring reliable communication for first responders when every second counts.

Superior FirstNet Connectivity
Signal Strength

Unmatched Signal Strength

Flexible to varying networking needs, the CEL-FI QUATRA EVO FN features single or dual carrier support with industry-leading gain up to 100 dB – outperforming traditional passive DAS systems. Get maximum boost for AT&T/FirstNet plus T-Mobile or Verizon (if desired).

Optimized Signal Clarity

Nextivity’s patented 4th generation IntelliBoost chip cuts signal noise, optimizing signal strength and quality. That means clear calls, faster data, and uninterrupted communication for first responders as well as employees and customers in all critical areas.

Optimized Signal Clarity
Scalability

Scales to Any Building

Cel-Fi QUATRA EVO FN systems are custom-designed by our expert installation team to meet your coverage needs and budget. Using category cabling with fiber expansion support, the EVO FN can be tailored to fit any building or campus without signal loss issues.

No excess, no waste, no overrun. Just superior coverage to your specifications.

Stay in Control

Nextivity’s WAVE portal allows remote monitoring and management. Easily track performance, adjust settings, and keep your system running at its best – anytime, anywhere.

Stay in Control
Product Overview

The CEL-FI QUATRA EVO FN by Nextivity is an intelligent distributed antenna system designed to enhance 5G/4G coverage in enterprise or government buildings for up to two carriers. Supporting FirstNet Band 14, you can configure the EVO FN to boost FirstNet/AT&T plus another carrier (T-Mobile or Verizon). Whether deployed in single- or double-operator mode, it ensures reliable communication for first responders while also strengthening connectivity for employees and customers.

Featuring industry-leading gain up to 100 dB gain and IntelliBoost technology, the QUATRA EVO FN minimizes signal noise and maximizes performance in any environment– rural, suburban, or urban.

Scalable architecture adapts to buildings and campuses of any size, delivering robust coverage for FirstNet users, staff, and customers where it’s needed most. Category cabling with fiber expansion support enables efficient signal transmission over long distances without degradation, ensuring strong connectivity throughout.

The Nextivity WAVE Portal makes it easy to keep an eye on your system for peak performance.

Cel-FI QUATRA EVO FN Components
  • QUATRA EVO FN Network Unit (NU): The hub of the system. Features two donor antenna ports: one for AT&T/FirstNet and the other for Verizon or T-Mobile. It works with up to six coverage units, or can be used on its own to provide up to 75,000 sq ft of coverage.
  • QUATRA EVO FN Coverage Unit (CU): Extend coverage with ease. Connect up to six CUs to a single NU to scale coverage up to 300,000 sq ft. Each CU is powered by Power-over-Ethernet (PoE) from the NU, reducing installation complexity.
  • QUATRA Fiber HUB (Optional): The Fiber Hub allows even more scalability for a Cel-Fi QUATRA EVO FN system at a lower cost overhead. It can be installed up to 2km away from an NU, extending reach while maintaining the same signal quality throughout the system.
  • Passive Indoor Antennas: Distribute the signal provided by the QUATRA system. These can be yagi or omnidirectional, panel or dome depending on your building’s layout and design. Each NU or CU can supply up to 16 indoor antennas.
How it Works

The outdoor antenna captures signal from nearby towers and relays it to the Network Unit (NU), which distributes it via Cat5 cables to each Coverage Unit (CU). Each CU amplifies the signal up to +100 dB. Connected antennas then broadcast the enhanced signal throughout the building, ensuring robust coverage through floors and walls to eliminate dead spots.

How it Works
Installation

We've partnered with Bolton Install Pros to provide full turnkey integration of in-building wireless (IBW) systems that amplify signal indoors, delivering the signal you need to get the job done. From the first call to post-project, Bolton Install Pros handles every detail personally in-house. Their team of RF engineers, system integrators, designers, and certified signal boost specialists take complete ownership of your project.

If you have any questions about installation, please call us at 1-800-420-3211

  1. Assessment
    • Consultation
    • Site Survey
  2. System Design
    • Data Analysis
    • Floor Plans
    • Equipment & Pricing
  3. Installation
    • Installing Equipment
    • Optimization
  4. Support
    • Documentation
    • Monitoring & Support
Technical Specifications
CEL-FI QUATRA EVO FN Frequency Bands
Band Port Downlink (MHz) Uplink (MHz) Uplink Power (dBm)
2A & C1930–19901850–191022
4A & C2110–21551710–175522
5A Only869–894824–84920
12A Only729–746699–71620
14C Only758–768788–79820
25A & C1930–19951850–191522
30A Only2350–23602305–231519


Main Unit
Power Consumption321.3 W max
Input Voltage100–240 V
Operating Temp32°F to 104°F (0°C to 40°C)
Humidity0–95%, non-condensing
CoolingPassive Convection
Ingress ProtectionIPX0
Dimensions14.5 x 11.6 x 3.7 in
Weight15.2 lbs (6.89 kg)
Donor RF Connectors2x N-type (f)
CU Interface2x RJ45 per CU (up to 6 CUs)
ExpansionSFP+ port for Fiber Hub
Status LEDsPower, LAN, CU Link
Debug & ConfigUSB 2.0 Micro-B, RJ45 for WAVE
Compliance
CertificationsFCC (Part 15/90), UL, ISED, RoHS3
Standards3GPP TS 25.143 & 36.143 Rel 13
Frequently Asked Questions

Can the QUATRA EVO FN Be Set Up Outdoors?

No. The QUATRA units are not weatherproof and must be deployed indoors.

What’s the Difference Between the QUATRA EVO FN and QUATRA EVO?

The QUATRA EVO FN is similar to the standard QUATRA EVO, but with FirstNet support.

Does the QUATRA EVO FN Require Carrier Approval Before Installation?

No. The EVO FN is pre-approved for immediate deployment by AT&T, FirstNet, Verizon, and T-Mobile.

Can the EVO FN Be Configured to Only Boost FirstNet?

Yes, the QUATRA EVO FN can be configured to boost only FirstNet/AT&T. In single-operator mode, the unit will boost four AT&T bands, including FirstNet Band 14, ensuring first responders keep connected during critical moments.