Find the Right Signal Booster for You
Answer a few questions and we'll recommend the best solution to solve your cell signal problems.
FREE Standard Shipping*
Read Featured Reviews From Actual Customers Read All Reviews
Superior Cellular Reception for Your Rig
The Bolton Velocity Trucker XL cellular booster is optimized for semi-trucks and other big rigs. It significantly improves talk, text, and 4G/5G data throughout your cab for all cellular devices (cell phones, tablets, mobile hotspots, cellular gateways, etc.) across all U.S. carriers (AT&T, T-Mobile, Verizon, etc.). Dropped calls, failed messages, and sluggish data on the road will be a thing of the past.
Cut Through Spotty Cell Signal
Paired with the all-new Bolton Blade XL, the most powerful OTR antenna on the market, the Bolton Velocity Trucker XL offers greater connectivity in more places. Standing at 43.5”, it can easily rise above your rig’s cab, cutting down obstructions and maximizing signal strength. With the exclusive whistle-free warp and sturdy mast, truckers will experience distraction-free rides with minimal antenna noise and swaying.
Keep in Touch Anywhere You Haul
Boasting up to 50 dB gain and up to 29 dBm uplink, the Bolton Velocity Trucker XL outperforms other cell phone boosters on the open road. It significantly improves communication to and from cell towers relatively everywhere, including remote stretches. Enjoy hauling across the country without interruptions.
On-the-Road Connectivity Made Simple
Setting up the Bolton Velocity Trucker XL is simple. Just mount the antennas, place the amplifier in a well-ventilated spot, and hook up the coaxial cables. It’s as easy as 1, 2, and 3. In no time, your rig will be powered up with enhanced cell reception.
Tailored for Every Rig on the Road
The Bolton Velocity Trucker XL meets all your trucking needs. With its versatile mounting options, you can fine-tune your setup for optimal performance. Choose from a trunk lip mount, mirror mount, rack mount, RV s-bracket, Kenworth mount, International LT mount, Freightliner Cascadia P4 mount, or a bird perch mount for the perfect fit.
About the Bolton Velocity Trucker XL Kit
The Bolton Velocity Trucker XL is a powerful cellular booster designed for semi-trucks and other big rigs.
Boasting up to 50 dB gain and up to 29 dBm uplink, it offers superior signal amplification for all US carriers anywhere cell signal is available. This includes remote stretches. Truckers will experience improved talk, text, and 4G/5G data across all cellular-enabled devices within range.
Paired with the all-new Bolton Blade XL, it’s the ultimate hauling companion. 43.5” tall, it easily rises above the cab to capture strongest cell signals. The whistle-free wrap and sturdy fiberglass mast minimize antenna noise and swaying.
With multiple mounting options, the Bolton Velocity Trucker XL can fit any rig.
- Trunk Lip Mount – Universal Fit
- Mirror Mount – Universal Fit
- Rack Mount – Universal Fit
- RV S-Bracket – Universal Fit
- Kenworth Mount – Custom Fit for Kenworth Trucks 2013+ Models
- International LT Mount – Custom Fit for International LT Trucks 2017+ Models
- Freightliner Cascadia P4 Mount – Custom Fit for Freightliner Cascadia P4 2017+ Models
- Bird Perch Mount with Mirror Bracket – Universal Fit
Everything you need for an easy breezy installation is included in the kit:
- Cell Phone Signal Booster for Big Rigs
- Boosts Talk, Text, and Data
- Up to 50 dB Gain
- Up to 29 dBm Uplink
- 5G ready
- Works with All US Carriers and Cellular Devices
- Includes 43.5” Bolton Blade XL Antenna with Whistle Free Wrap and Sturdy Mast
- Versatile Mounting Options to Fit Any Rig
- Complete kit
How It Works
The Bolton Velocity Trucker XL works in three easy steps:
- The Bolton Blade XL outdoor cellular antenna pulls in existing 4G and 5G signals.
- The Velocity amplifier boosts received cell signals.
- The Bolton B-Flat inside antenna broadcasts enhanced signals inside cab.
Who Is It For?
- Dry Van Trucks
- Dry Bulk Cargo Trucks
- Tipper Commercial Trucks
- Flatbed Trucks
- Lowboy Semi-Trailers
- Refrigerator Semi-Trucks
- Tanker Trucks
- And More
Kit Includes
- Bolton Velocity Vehicle Booster Part # BT459624
- Outside BladeXL Antenna Part # BT151908
- Inside B Flat Antenna Part # BT459679
- Bolton DC Power Supply
- Mount Part #BT459815
- Adapter FME-Female to SMA-Female Part # BT512037
- Power Supply-DC Part # BT459815
Technical Specifications
| Bolton Velocity Vehicle Kit | |||
|---|---|---|---|
| Uplink (MHz) | 698-716 776-787 824-849 1710-1755 1850-1915 |
||
| Downlink (MHz) | 728-746 746-757 869-894 1930-1995 2110-2155 |
||
| Input/Output Impedance | 50 Ohm | ||
| Maximum Gain | 50 dB | ||
| Max Uplink Power | 29 dBm | ||
| Noise Figure | ≤5 dB | ||
| VSWR | ≤2.0 | ||
| Gain Adjustment | 20 dB (Automatic) | ||
| Maximum Output Power | 1 Watt EIRP | ||
| Cable Type Outside | RG-58U | ||
| Cable Type Inside | SC-174 | ||
| Outside NMO Antenna Cable | 17 feet | ||
| Inside Patch Antenna Cable | 10 feet | ||
| Hardwire Power Supply Cable | 18 feet | ||
| RF Connectors | FME male (both ends) | ||
| Power Consumption | <10W | ||
| Dimensions | 6.58" x 4" x 1.125" | ||
| Weight | 1.43 lbs | ||
| FCC NOTICE | This is a CONSUMER device. BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider's consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person. You MUST cease operating this device immediately if requested by FCC or a licensed wireless service provider. | ||
| WARNING: California's Proposition 65 | This product can expose you to chemicals including Nickel (Metallic) which is known to the State of California to cause cancer and Bisphenol A (BPA) which is known to the State of California to cause birth defects or other reproductive harm. For more information go to https://www.p65warnings.ca.gov/. | ||
Installation
-
Step 1. Mount Blade Antenna
Once you have determined the mounting location, assemble the antenna parts by routing the cable through the cable exit quick disconnect. If using the provided mounting bracket, we recommend installing the spring base and mounting bracket before adding the remaining assembly.
Install Mounting Bracket
1) Secure bracket to vehicle rail using provided hardware. Secure all four bolts in place and tighten with a wrench.
2) Attach the Dome mount to the bracket, securing with wrench
3) (Optional) Attach spring or 90-degree layover mount
4) Attach Blade XL OTR antenna to dome mount, screwing in tightly
5) Connect SMA-cable
Route Cable
Route cable from outside to the inside of the cabin behind a door seal where your booster will be located. -
Step 2: Install Inside Flat Antenna
Identify a location for the inside antenna or near your front dashboard that is:
1) Within 2-3 ft of the most common cell phone location
2) At least 8 inches from cellular devices
3) At least 4 inches from metal
Next, peel the Velcro backing and apply to a clean dry surface in your chosen location.
Or, use the free vent clip provided by with your product as a mounting surface then clip it to the air vent. -
Step 3: Place Booster and Connect Cables
Select a well-ventilated area away from excessive heat, direct sunlight, and moisture. We usually recommend installing the booster under a seat or within the front console.
Connect the cable from the outside antenna to the connection marked OUTSIDE and connect the cable from inside flat antenna to the connection marked INSIDE. Tighten the connections and wrap up any loose cable. You may need to use the included adapters to connect the cables properly.
NOTE: Included adapters may be needed to connect cable to booster. -
4. Connect Power
Connect the power cord connector to the signal booster and insert the other end into your cigarette lighter adapter. The Power LED illuminates to show the signal booster is ready for use. The Alert LEDs flash 5 times to show the frequency band is operational.
Note: When your vehicle is off, turn the power switch to OFF to keep the booster from continuing to draw power from your vehicle.
Frequently Asked Questions
Does the Bolton Velocity Trucker XL boost 5G?
Yes, but not all 5G signals. The Velocity Trucker XL will only boost 5G signals operating on the supported frequency bands.
Does the Bolton Velocity Trucker XL work when the vehicle is turned off?
This will vary across vehicles. If your DC power supply doesn't work when the vehicle is off, the Velocity Trucker XL won't work either.
Do I need cell signal for the Velocity to work?
Yes. For any signal booster to work you need at least one bar of outside signal.
What's the difference between the different Velocity kits?
Each Velocity kit comes with a different set of antennas. The standard kit (BT459624-M) has a Mighty Mag magnet mount antenna and an inside flat panel antenna. This trucker kit (BT459624-T) has an outside Blade antenna and an inside flat panel antenna. The RV kit (BT459624-RV) has an outside Blade antenna and an inside whip antenna.
Does Velocity Trucker XL Come with a Hardwire Power Supply?
No. However, a hardwire power supply (BT459938) is available separately.