FREE Standard Shipping*
Read Featured Reviews From Actual Customers Read All Reviews
Power Up Your IoT
The WilsonPro IoT MIMO 2x2 enhances 5G and 4G signals with 2x2 MIMO technology, ensuring faster, more reliable data transfer for any data-demanding IoT applications.
Boosted Performance
No more system downtime. With up to 15 dB gain and 24 dBm uplink, the IoT MIMO 2x2 dramatically reduces latency and network lapses in weak signal environments.
Uninterrupted Data Flow
Passive RF bypass failover ensures continuous data flow. If the amplifier loses power, unamplified signal continues to pass through, keeping IoT devices going.
Flexible Deployment
Supporting Power over Coax, the IoT MIMO 2x2 allows flexible amplifier placement for optimal performance.
Plug-and-Play
Pre-approved by all major U.S. carriers, the IoT MIMO 2x2 is ready for immediate deployment for instant IoT connectivity boost.
The WilsonPro IoT MIMO 2x2 is the go-to signal booster by WilsonPro for data-demanding IoT applications. It’s a direct connect solution designed for use with cellular modems or routers. Leveraging 2x2 MIMO it delivers higher data throughput, ensuring faster, more reliable data transfer. Offering up to 15 dB gain and 24 dBM uplink, it significantly boosts IoT connectivity in weak signal areas, improving uptime and your bottom line.
Pre-approved by all U.S. carriers, the IoT 3.0 is ready to go out of the box. Featuring Power over Coax, it allows flexible placement for optimal 5G/4G signal amplification. If the amplifier loses power, passive RF bypass failover keeps data flowing seamlessly for continuous IoT operation.
- The outdoor antenna draws in existing cell signal
- The signal is sent to the signal booster or cellular amplifier
- The signal is then sent directly to the connected cellular modem, improving data transmission.
- IoT MIMO 2x2 Amplifier & Wall Mount Bracket - 462079
- 2x External Hinged Antenna - ANT000058
- 2x Power Over Coax Units - ACC000084
- PoC Unit Bracket
- 20’ Conjoined N to N Cable - CBL000144
- 2x 1’ SMA to SMA Cable - CBL000141
- Dual Connector 12V AC/DC Power Supply - PWR000050
| Fusion2Go XR | |
|---|---|
| MODEL NUMBER | 462079 |
| FREQUENCIES |
Band 12 700 MHz Band 13 700 MHz Band 5 850 MHz Band 4 1700/2100 MHz Band 25/2 1900 MHz |
| MAX GAIN | 15 dB |
| MAX UPLINK POWER | 24 dBm |
| MAX DOWNLINK POWER | -5 dBm |
| IMPEDANCE | 50 Ohm |
| POWER | 12V DC / 2A |
| CONNECTORS | N-Female |
| AMPLIFIER DIMENSIONS | 5.4 x 4.2 x 1.4 in |
| AMPLIFIER WEIGHT | 1.58 lbs |
| UPC | 810005965538 |
| FCC Notice |
This is a CONSUMER device. BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider's consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person. You MUST cease operating this device immediately if requested by FCC or a licensed wireless service provider. |
-
The WislonPro IoT MIMO 2x2 is simple to install. Reference the installation manual for step-by-step instructions. Give us a call 1-800-470-6777 or email sales@signalboosters.com for additional assistance.
Frequently Asked Questions
The WilsonPro IoT MIMO 2x2 will not get your phone better service, as it is designed to be directly connected to an IoT device.
If you’re looking for a phone to improve cell service in a home or vehicle, see our cell phone signal boosters.
The IoT MIMO 2x2 amplifier supports a wide range of IoT applications, including ATMs, PoS terminals, EV chargers, and much more.
The IoT 3.0 can amplify 5G signals across the 700–2100 MHz frequency range
Power over Coax (PoC) simplifies installation by enabling both power and signal to be transmitted through a single coaxial cable. This reduces cable clutter, eliminates the need for multiple power sources, and allows flexible setup for optimal performance.
Passive RF bypass ensures your cellular modem remains connected even if the amplifier loses power. It allows unamplified signals to pass through, keeping your data flowing without interruptions.