FREE Standard Shipping*
Read Featured Reviews From Actual Customers Read All Reviews
Cell Phone Booster for Metal Buildings
Metal roofs and walls block cellular signals, limiting indoor cellular coverage. The weBoost Metal Building 200 Cell Phone Booster cuts through the metal, strengthening 5G and 4G connectivity so communication and productivity never stall.
Connected Metal Workspace
The weBoost Metal Building 200 covers up to 10,000 sq ft* of workspace with clear calls, reliable messaging, and faster data speeds. XDR technology ensures uninterrupted performance if signal conditions change. Thick metal walls will no longer disrupt workflow or client satisfaction.
*Coverage will vary based on outside signal strength, indoor layout, and setup.
Boost Cell Signal Your Way
No two metal buildings face the same challenges. From recreational facilities in the city to metal office parks at the edge of the network, choose from three Metal Building 200 booster configurations to maximize results:
- Omni Kit: Captures signals from all directions for easy setup and reliable performance in buildings with decent outside signal strength.
- Yagi Kit: Focuses power in a single direction to reach towers up to 5 miles away, ideal for metal buildings in semi-rural areas.
- LPDA Kit: Highly directional for extended reach, connecting to towers up to 10 miles away. Best for remote or rural metal buildings.
Work Without Worry
Connection drops and frustrations will be a thing of the past for employees and clients alike. The weBoost Metal Building 200 is compatible with all U.S. carriers and works with smartphones, tablets, and hotspots for seamless accessibility.
Simple Setup, Lasting Performance
Do-it-yourself installation friendly, transform in-building cellular connectivity in just a few hours. Everything you need is included in the box with minimal tool requirements. The LCD touchscreen allows easy performance monitoring. Run your business with confidence knowing metal won’t interrupt operations.
About the weBoost Metal Building 200
Metal roofs and walls don’t have to mean weak cell signal. The weBoost Metal Building 200 Cell Phone Booster strengthens 5G and 4G signals inside metal buildings. It keeps calls, texts, and data flowing seamlessly inside metal office parks, warehouses, repair shops, recreational facilities, and more.
With up to 72 dB gain, up to 25 dBm uplink, and 15 dBm downlink, the weBoost Metal Building 200 is 2x more powerful than the base weBoost Metal Building I. Under perfect conditions, it can improve cellular connectivity in up to 10,000 sq ft, keeping business on track and communication strong. With XDR technology, the cell booster automatically adjusts to changing signal conditions to prevent system shutdowns.
Three Metal Building 200 kits are available to optimize performance in varying signal environments:
- Omni + Dome Kit: Best for metal buildings in urban or suburban areas with decent outdoor signal. The omni antenna pulls in signal from all directions, paired with dome indoor antennas for even coverage inside.
- Yagi + Dome Kit: Ideal for metal buildings in semi-rural areas 3-5 miles from cell towers. The Yagi antenna focuses power in a single direction for higher-quality boost when signal is weak, with dome indoor antennas spreading reliable signal throughout your workspace.
- LPDA + Dome Kit: Optimized for metal buildings in rural or remote areas needing extended reach up to 10 miles. The LPDA antenna targets distant towers with precision, and dome indoor antennas deliver the strongest possible signal where it matters most.
Kit Includes
- weBoost Office 200 Amplifier
- Wilson Electronics 4G Omni Plus Antenna 50 Ohm (SKU: 314422)
- 4x Wilson Electronics Low Profile Dome Antenna 50 Ohm (SKU: 310005)
- Wilson Electronics -6dB 4-Way Splitter N-Female 50 Ohm (SKU: 859117)
- 4x Wilson400 Cable 60-ft. N-Male to N-Male (SKU: 952360)
- Wilson400 Cable 75-ft. N-Male to N-Male (SKU: 952375)
- Wilson Electronics Pole Mounting Assembly (SKU: 901117)
- Wilson Electronics Lightning Arrestor (SKU: 850050)
- 2x Wilson400 2 ft Low-loss Coax Cable N-Male (SKU: 952302)
- weBoost Office 200 Amplifier
- Wilson Electronics Directional 50 Ohm Yagi Antenna (SKU: 311233)
- 4x Wilson Electronics Low Profile Dome Antenna 50 Ohm (SKU: 310005)
- Wilson Electronics -6dB 4-Way Splitter N-Female 50 Ohm (SKU: 859117)
- 4x Wilson400 Cable 60-ft. N-Male to N-Male (SKU: 952360)
- Wilson400 Cable 75-ft. N-Male to N-Male (SKU: 952375)
- Wilson Electronics Pole Mounting Assembly (SKU: 901117)
- Wilson Electronics Lightning Arrestor (SKU: 850050)
- 2x Wilson400 2 ft Low-loss Coax Cable N-Male (SKU: 952302)
- weBoost Office 200 Amplifier
- Wilson Electronics High Gain LPDA Antenna (SKU: 311228>)
- 4x Wilson Electronics Low Profile Dome Antenna 50 Ohm (SKU: 310005)
- Wilson Electronics -6dB 4-Way Splitter N-Female 50 Ohm (SKU: 859117)
- 4x Wilson400 Cable 60-ft. N-Male to N-Male (SKU: 952360)
- Wilson400 Cable 75-ft. N-Male to N-Male (SKU: 952375)
- Wilson Electronics Pole Mounting Assembly (SKU: 901117)
- Wilson Electronics Lightning Arrestor (SKU: 850050)
- 2x Wilson400 2 ft Low-loss Coax Cable N-Male (SKU: 952302)
Technical Specifications
| weBoost Metal Building 200 | ||
|---|---|---|
| SKUs |
WA472047-OLD4 - Omni/Dome WA475047-YD4 - Yagi/Dome WA475047-LDD4 - LPDA/Dome |
|
| Frequency | Band 17 - 700 MHz Band 13 - 700 MHz Band 5 - 850 MHz Band 4 - 1700/2100 MHz Band 25/2 - 1900 MHz |
|
| Max Gain | 72 decibels (dB) | |
| Impedance | 50 Ohm | |
| Power | 110-240V AC, 50-60 Hz, 20 W | |
| Connectors | N-Female | |
| Booster Dimensions | 14.25 x 10.75 x 2.25 in | |
| Booster Weight | 7.7 lbs | |
| FCC NOTICE | This is a CONSUMER device. BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider's consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person. You MUST cease operating this device immediately if requested by FCC or a licensed wireless service provider. | |
| WARNING: California's Proposition 65 | This product can expose you to chemicals including Nickel (Metallic) which is known to the State of California to cause cancer and Bisphenol A (BPA) which is known to the State of California to cause birth defects or other reproductive harm. For more information go to https://www.p65warnings.ca.gov/. | |
Frequently Asked Questions
Metal is the #1 cell phone signal blocker, leading to limited indoor coverage or dead zones. The weBoost Metal Building 200 Cell Phone Booster is designed to bypass metal roofs and walls to strengthen 5G and 4G reception inside metal buildings. If you’re running a mechanic shop, warehouse, or indoor recreational establishment, and dropped calls, failed texts, and slow data are hurting your business, the Metal Building 200 Cell Phone Booster will change that.
Under optimal conditions, the weBoost Metal Building 200 Cell Booster offers up to 10,000 sq ft. However, actual coverage will vary depending on your outside signal strength, indoor layout, and even setup. The weaker your outside signal, and the more walls inside, the smaller the coverage you’ll get.
As long as you have a signal outside, even if weak, the Metal Building 200 can improve connectivity in any small to medium metal building. It’s designed to specifically overcome the signal-blocking effects of metal roofs and walls.
It works with all U.S. carriers, including AT&T, T-Mobile, US Cellular, and more. It will enhance 5G and 4G signals for all carriers within the antenna's radiation beam simultaneously.
The right weBoost Metal Building 200 booster kit configuration mostly comes down to your signal environment:
- Omni + Dome Kit: Best for urban/suburban applications with decent outside cell signal strength. Using an omnidirectional outdoor antenna, this system can send and receive cellular signals from all directions, limiting reach to cell towers. The dome indoor antenna broadcasts signal in all directions evenly and requires ceiling mounting.
- Yagi + Dome Kit: Best for semi-rural applications where Metal Building 100s 3-5 miles from towers. The Yagi antenna sends and receives signals from one direction, allowing it to communicate with farther cell towers compared to the omnidirectional antenna. Directional, the dome indoor antenna can deliver targeted coverage to key work areas.
- LPDA + Dome Kit: Best rural or remote applications where Metal Building 100s up to 10 miles from towers. The LPDA outdoor antenna offers the farthest range and requires precise aiming at your closest cell tower, allowing connectivity at the edge of the network. The dome antenna broadcasts the strongest signal possible where it’s needed most.
If you need help selecting the best booster for your unique situation, please give us a call at 1-800-969-8189.
Yes. While it’s designed for commercial metal buildings, it can also improve cellular coverage in metal homes, like banrdomeniums. Coverage and results will vary.
The weBoost Metal Building 200 Cell Phone Booster enhances 5G and 4G signal within the 700-2100 MHz bands.
No. The weBoost Metal Building 200 works right out of the box with no ongoing fees, contracts, or subscriptions required.