FREE Standard Shipping*
Better Cell Signal For Your Business
Get superior 4G and 4G LTE coverage inside your building, no matter if you are in the city or out in the country, with the weBoost Office 200. This sleek amplifier brings existing cell signal indoors to bathe your warehouse, retail space or office in reliable, strong cell signal. The Office 200 is powerful enough to connect your business at all times. Cover between 12,000 to 35,000* sq ft in-building.
* Effective coverage area depends on quality and strength of outside cellular signal, internal building materials, and antenna configuration.
Superior Cell Signal No Matter Where You Are
Whether you are based in a rural, suburban or urban area, the Office 200 ensures strong stable signal for your business. Keep connected to your customers, vendors, remote employees, and provide your in house employees with great signal in all corners of your building or warehouse.
Fully Customizable Manual Control
The kit features professional design and quality parts from Wilison Electronic and is weBoost’s most powerful signal booster. It is fully adjustable with an easy-to-read LCD screen and manual control of the frequency bands you are boosting. Choose between 50-ohm for longer cable runs and 75-ohm for easier installation. Customize your solution to fit your buildings layout. This is our catch-all system for businesses.
5G Capable and FCC Approved
The Office 200 will boost voice and text on 5G phones, and it is FCC approved. It is perfect for creating a parallel network which means that you stay connected even if your WiFi signal goes down. Compatible with all US carriers and cellular bandwidths, the Office 200 is the answer for bad or weak cell signal.
Boost your Business with Better Cell Signal
weBoost for Business Office 200 is a superior cellular signal booster kit that comes with everything that you need to DIY your way to better signal. An easy install outdoor omni antenna and drop-tile compatible indoor dome antenna are included in the kit, but expansions are available as needed. Keep your customers happy and in touch in all sectors of your business. No monthly fees or extra costs, simply better cell signal all the time.
The weBoost Office 200 is weBoost's most powerful cell phone signal booster for small business.
The weBoost Office 200 mobile signal booster is useful for people who rely on their cell phones for their offices. If you require a stronger cellular signal to stay in contact with customers, vendors, remote employees, your employer, and everyone else in your life, the weBoost Installed Office 200 cell phone signal amplifier can help. It covers up to 35,000 sq ft under best conditions. Real-world results puts it around 12,000 sq ft. Of course, depending on your outside signal strength and outside antenna mounting option, you may get more or less coverage.
With 72 dB in max gain, the Office 200 offers residents the most reliable cell signal possible on all available network speeds. Generating up to 24 dBm in uplink-output power, it is by far the most powerful cellular signal booster for homes.
Wilson Electronics has been pioneering RF and cellular technology since the early 1990s. The weBoost Office 200 cell signal booster was borne of a desire to provide the absolute best quality, most powerful signal booster for business applications.
- Boosts 4G and 5G LTEfor any home or office up to 35,000 sq. ft.
- Works for all phones & cellular devices, all US carriers.
- Supports multiple cellular devices and users simultaneously.
- Multiple accessories for maximum coverage and customization (sold separately).
- Industry-leading design & performance by Wilson Electronics.
- Office 200 Amplifier
- Omni Plus Antenna Part # 314422
- Low Profile Dome Antenna Part # 314407
- Lightning Surge Protector Part # 859902
- 2ft Low-Loss Wilson400 Cable Part # 952302
- 60ft Low-Loss Wilson400 Cable Part # 952360
- 75ft Low-Loss Wilson400 Cable Part # 952375
- Power Supply
- Office 200 Amplifier
- Omni Plus Antenna Part # 314423
- Low Profile Dome Antenna Part # 314407
- Lightning Surge Protector Part # 859902
- 2ft Low-Loss RG11 Cable Part # 951127
- 60ft Low-Loss RG11 Cable Part # 951160
- 75ft Low-Loss RG11 Cable Part # 951175
- Power Supply
- Office 200 Amplifier
- Outside Directional Antenna Part # 311233
- Inside Panel Antenna Part # 311234
- Lightning Surge Protector Part # 859902
- 2ft Low-Loss Wilson400 Cable Part # 952302
- 60ft Low-Loss Wilson400 Cable Part # 952360
- 75ft Low-Loss Wilson400 Cable Part # 952375
- Power Supply
| weBoost Office 200 | |||
|---|---|---|---|
| SKU | WA472047 | WA471047 | WA475047 |
| Frequency |
Band 17 - 700 MHz Band 13 - 700 MHz Band 5 - 850 MHz Band 4 - 1700/2100 MHz Band 25/2 - 1900 MHz |
||
| Max Gain | 72 decibels (dB) | ||
| Power | 110-240 V AC, 50-60 Hz, 20 W | ||
| Connectors | N-Female | F-Female | N-Female |
| Impedance | 50 Ohm | 75 Ohm | 50 Ohm |
| Dimensions | 14.25 x 10.75 x 2.25 in | ||
| Weight | 7.7 lbs (Booster Only) | ||
| UPC | 810005963138 | 810005963121 | 810005963831 |
| FCC NOTICE | This is a CONSUMER device. BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider's consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person. You MUST cease operating this device immediately if requested by FCC or a licensed wireless service provider. | ||
| WARNING: California's Proposition 65 | This product can expose you to chemicals including Nickel (Metallic) which is known to the State of California to cause cancer and Bisphenol A (BPA) which is known to the State of California to cause birth defects or other reproductive harm. For more information go to https://www.p65warnings.ca.gov/. | ||
Installing any consumer signal booster setup is fairly simple, but can be a pain. The results, however, are worth it.
You’ll need some general handyman skills but nothing too specialized. If you prefer having someone else do the job, you can also contact your local general contractor, electrician, or anyone who's installed a satellite TV dish.
-
1. Find The Best Outside Signal:
Begin by finding the best signal outside your building. This is done by walking around the perimeter of your building and either using the number of bars on your phone (ok method), smartphone apps (good method), or Field Test Mode (great method) to find the best location. Pro tip: Locating the side of your building getting the best signal is the MOST CRUCIAL step of the installation process. -
2. Install Outside Antenna
The area with the best signal is where you will mount the outside antenna. Place the antenna as high up as possible, ideally on the roof, although the fascia or gable is acceptable. It's important that the outside antenna should be on or near the edge of the roof pointing away from the building to the cell tower and NOT pointing across the roof since it may cause interference with the inside antenna. Point the outside antenna at your nearest cell tower. -
3. Connect to Amplifier
Once the outside antenna is mounted, connect the included coaxial cable to the outside antenna and to the "outside antenna" port on the amplifier. Pro tip: The amplifier does all the heavy lifting for boosting signal and will get warm. Keep it in a well-ventilated area. -
4. Install Inside Antenna
Once the cable is connected to the "Outside Antenna" port of the amplifier, do the same for the "Inside Antenna" port. Some prefer having the antenna mounted on the ceiling, others prefer the wall. Again, it's all a matter of preference, and use case. If you have a panel antenna, they generally perform best on the wall, and if you have a dome antenna, they usually perform best on the ceiling. If you have multiple antennas, you will need to use a splitter to divide the cable runs, and then place each antenna where you'd like them. Pro tip: Having enough separation between the two antennas prevents oscillation. Make sure there is at least 20 feet vertical or 50 feet horizontal distance between the two. -
5. Power on
Plug in the power supply to the Amplifier and to the wall outlet. The amplifier will sync up and if you see all green lights, then green means GO! Check to see near the inside antenna how much better signal you're getting. Pro tip: Any post-installation adjustments like relocating the outside antenna will require rebooting the amplifier. Simply unplug the power supply for 5-10 seconds and replug to reboot the system. -
Technical Support & Troubleshooting
If you need help setting up your amplifier system and troubleshooting support: our trained product specialists can assist. Just call us at 1-800-470-6777 or email sales@signalboosters.com