From Uniden, the Most Trusted Name in Wireless
Uniden has been a household name for decades, keeping you connected with cordless telephones and CB radios. Now they’ve shifted their focus to cellular and are dedicated to bringing you the highest quality signal booster on the market.
Few things are more frustrating than weak cellular signal causing dropped calls, hanging web pages, frozen video pages, or slow texts. Uniden U60C cellular boosters provide the antidote to your frustration by boosting cellular signals in buildings for all North American cell carriers, including AT&T, Verizon, Sprint and T-Mobile. It greatly enhances cell service for all your wireless devices (smartphones, notebooks, hotspots, etc.). Further, it works regardless of phone model (iPhone, Android, Samsung Galaxy, etc) for up to 10 devices at once.
Bring Great Cellular into Your Home
The Uniden U60C is a simple, reliable, industrial quality amplifier. It can be easily placed within a home, whether on a surface or in a closet. It will boost signal strength on all available cellular networks, no matter where you are. Rural, suburban, urban – if you have some cellular signal outside, you’ll get it even stronger inside.
The Uniden U60C provides up to +60 dB of gain under best conditions, translating to a maximum of 1,500 sq ft of coverage. Strength of outdoor cellular signal will affect the amount of effective coverage you can expect with a signal booster, including the Uniden U60C. The stronger the signal outside, the more coverage you can expect inside.
No more dropped calls, slow internet, & disrupted service
The Uniden U60C is Uniden’s consumer-grade cell signal booster that works best for small home offices and single rooms. It enhances 4G, 4G LTE, and 3G in an area of up to 1,500 sq. ft.
Getting the right cellular setup is very important, but we have signal experts standing by to help you choose the best Uniden product that will help improve your life. Even with our help choosing a product, we still offer a 60-day money back guarantee, to ensure you get the right booster and antenna setup for your exact needs. With your purchase, you also get a 2-year warranty, and lifetime technical support from us here at Signal Boosters.
- Up to 1,500 sq. ft. of coverage under best conditions
- Best for single rooms, desktop areas, and small apartments
- Works for all carriers across all devices and phones
- Choose from N-Female or F-Female variants
- Choice of either an omnidirectional or Yagi outdoor antenna
- Choose our indoor whip antenna for easy installation
The Uniden U60C signal booster kit
is for:
For the small home or office size (1,500 sq ft).
Great for: Small homes and offices.
Not recommended for: needing whole building coverage above 2,000 sq ft.
| Uniden U60C Cell Signal Booster | |
|---|---|
| Frequencies - Uplink | 698-716 MHz; 776-787 MHz; 824-849 MHz; 1850-1915 MHz; 1710-1755 MHz |
| Frequencies - Downlink | 734-746 MHz; 746-757 MHz; 869-894 MHz; 1930-1990 MHz; 2110-2155 MHz |
| Max Gain | 72 decibels (dB) |
| Impedance | 50 Ohm |
| Power | Input AC 90 ~ 240V, Output DC 12 V / 5 A |
| Connectors | N-Female |
| Weight | 2 kgs (Booster Only) |
FCC NOTICE:
This is a CONSUMER device. BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider's consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person. You MUST cease operating this device immediately if requested by FCC or a licensed wireless service provider.
WARNING: California's Proposition 65
Installing any consumer signal booster setup is fairly simple. There are five steps:
- Install Outside Antenna.
- Connect to the Amplifier.
- Connect all cables.
- Power on.
The most “difficult” part is installing the Outside Antenna.
You’ll need some general handyman skills but nothing too specialized. If you prefer having someone else do the job, you can also contact your local general contractor, electrician, or anyone who’s installed a satellite TV dish.
Let’s start:
- Find The Best Outside Signal: begin by finding the best signal outside your house. This is done by walking around the perimeter of your home and either using the number of bars on your phone (ok method), smartphone apps (good method), or Field Test Mode (great method) to find the best location. Pro tip: Locating the side of your home getting the best signal is the MOST CRUCIAL step of the installation process.
- Install Outside Antenna: The area with the best signal is where you will mount the Outside Antenna. Place the antenna as high up as possible, ideally on the roof, although the fascia or gable is acceptable. It’s important that the Outside Antenna should be on or near the edge of the roof pointing away from the house to the cell tower and NOT pointing across the roof since it may cause interference with the Inside Antenna.
- Connect to Amplifier: Once the Outside Antenna is mounted, connect the included RG-6 cable to the Outside Antenna and to the “Outside Antenna” port on the amplifier. Some run cable into the attic, others prefer using the window-entry cable. It’s all a matter of preference and aesthetics and where you want to locate the amplifier. Pro tip: The amplifier does all the heavy lifting for boosting signal and will get warm. Keep it in a well-ventilated area.
- Install Inside Antenna: Once the cable is connected to the “Outside Antenna” port of the amplifier, do the same for the “Inside Antenna” port. Some prefer having the Inside Antenna mounted on the ceiling, others prefer the wall, and some prefer using the stand and placing it in a well-trafficked area. Again, it’s all a matter of preference and aesthetics. The most important point is to have the inside antenna located in the area you need signal the most. Pro tip: Having enough separation between the two antennas prevents oscillation. Make sure there is at least 20 feet vertical or 50 feet horizontal distance between the two.
- Power on: Plug in the power supply to the Amplifier and to the wall outlet. The amplifier will sync up and if you see all green lights, then green means GO! Check to see near the inside antenna how much better signal you’re getting. Pro tip: Any post-installation adjustments like relocating the Omni Antenna will require rebooting the amplifier. Simply unplug the power supply for 5-10 seconds and replug to reboot the system.
