WilsonPro Pro 710i Commercial Cell Signal Booster

SKU: WA460064

Free Standard Shipping FREE Standard Shipping*
Wilson Pro 710i Commercial Signal Booster - Side View
  • Designed to boost low-band 5G coverage exclusively on Band 71 up to 100,000 sq. ft
  • Use as a stand-alone unit or an add-on to any Wilson Pro system
  • Get a massive boost to 5G data in-building
  • Future-proof your business with low-band 5G coverage
This enterprise product cannot be sold online. The final price depends on configuration. Contact our signal experts and we can help you design the most cost-effective solution tailored to your specific requirements.
Or call our experts directly Mon-Friday 8AM-5PM CST.

Meet Wilson’s first 5G In-Building Commercial Cell Signal Amplifier.

Designed for large enterprise areas such as office buildings, retail stores or warehouses up to 100,000 square feet. The Pro710i is the first booster of its kind in the US built exclusively for band 71.

Upgrade your existing Wilson System, or Create a new One

The Pro 710i can easily integrate with an existing Wilson signal booster system, or be installed as a standalone unit.

Cover your area with Band 71 5G signal 

The Pro 710i uses the 600MHz frequencies, one of the most common 5G frequencies since its inception. Boost multi-carrier 5G* over large areas even through walls with up to +90dB max gain. *Requires approval by applicable Band 71 carrier.

Who is it for?

From low to more bars instantly!

The 710i Takes in signal via an outside antenna. It then amplifies it and sends it to internal antennas. * Antennas not included.

Technical Specifications
Wilson 710i
Product Number 460064
Frequencies Band 71-600 MHz
Max Uplink, Downlink Power 25 DbM
Impedance 50 Ohms
Maximum Gain 90 dB
AC Power Transmitter Input AC 110V
Connector N-Female
Dimensions 10.37 x 9.06 x 3 in
Weight 6.375 lbs


This is a CONSUMER device. BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider's consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person. You MUST cease operating this device immediately if requested by FCC or a licensed wireless service provider.

How to install
Office buildings.
Retail stores.
Large homes.

Frequently Asked Questions

Will I need to do a complete re-install to add the Pro 710i to my existing system?

That depends on your antenna setup. The Pro 710i can easily be added to an existing WilsonPro system, but it will need an extra outdoor antenna. Band 71 can only be picked up by specific antennas. Using an existing outside antenna is possible with N-type “combiners” and short coax jumper cables. Band 71 performance will vary based on the antenna used. We recommend the following specific antennas for the Pro 710i and Band 71 coverage: The Wideband Directional Antenna 50 Ohm Indoor Wall-Mount Antenna 50 Ohm.

Can I use the Pro 710i on its own?

Yes. The Pro 710i can be used by itself to boost only Band 71, if it has the correct antennas. You will get better coverage with extra boosters to cover more bands though. We suggest adding an Enterprise 1300 or 4300.

Will boosting band 71 really make a difference to my system?

If you have band 71 towers in your area then having a dedicated booster will greatly improve your 5G speeds. If there are no Band 71 towers, you won't see improvement. To see if your current phone or cellular device runs on the Band 71 spectrum, check with your carrier.