Bolton Indoor Panel Antenna: "The Board"
The Bolton Technical Indoor Panel Antenna is a Low-PIM, wideband and directional indoor antenna with low return loss and stable performance.
This is an ultra-high quality panel antenna for broadcasting cellular signal and is the ideal accessory for your 50 ohm cell phone signal booster system, providing boost gain at the end point by up to 8 dB.
PIM stands for Passive Intermodulation and is measured in dBs (decibels) and is defined as the unwanted signal or signals generated by the non-linear mixing of 2 or more frequencies. High PIM means poor cellular reception and limited bandwidth for the end user. Low PIM means stronger signals with more bandwidth for more users - in other words, the lower PIM delivered by this Bolton Technical indoor panel antenna delivers better signal and lower loss. Making it the ideal investment to add to your signal booster system.
Panel antennas radiate signal in a 45 degree, “flashlight” pattern and are best placed on walls or in areas which allow the signal to propagate. The Bolton Technical Indoor Panel Antenna is designed to make placement easy with its lightweight design and compact size.
Who is this for? Anyone who wants to extend the coverage of their cellular system with a relatively inexpensive directional interior antenna. These provide higher gain than omnidirectional dome antennas, so are most effectively used in rural areas or if you desperately want to squeeze as much power out of your system as possible. These are somewhat harder to place than dome antennas, but can make a huge difference when properly used.
- Low PIM with up to +8 dB gain
- Ultra-low loss wideband directional indoor antenna
- Small, lightweight, and easy to install
- For 50 ohm signal booster systems
- Radiates signal in a 45 degree “flashlight” pattern