Find the Right Signal Booster for You
Answer a few questions and we'll recommend the best solution to solve your cell signal problems.
Read Featured Reviews From Actual Customers Read All Reviews
All the Coverage You Need
The Bolton Victory Omni/Panel kit covers up to 4,000 square feet under best conditions. It offers up to +72 dB gain, enough to cover a cabin or small home with good outside signal, or a decent-sized room with weaker outside signal. Get yourself all the signal you need, no matter where you are.
+4 dBi With The All Rounder
The Bolton Victory Omni / Panel kit features the Bolton All Rounder omnidirectional cellular antenna. This high-powered device draws in signal from every direction, minimizing installation risks and covering every carrier easily. The Omni / Panel kit provides the smoothest installation with multiple carrier coverage and the highest indoor gain possible, even if your outdoor signal is weak.
Our Pick for Easy DIY Installation
The Bolton Victory Omni / Panel kit is our pick for easy home install. Simply mount the outside antenna in an area with usable cell signal, run it into your building, set up the booster and inside panel, and turn it on. The kit can cover up to 3,000 sq ft under best conditions, but you'll most likely see around 1,500 sq ft of coverage. That's enough for most single story homes or offices!
Drop the Stress of Dropped Calls
The Bolton Victory cell phone signal booster for home connects users across North America using an upgraded cell phone signal amplifier that delivers twice the uplink power of its competition, reaching towers at greater distances than ever before.
Total Compatibility for All Devices and Networks
The Bolton Victory Omni / Panel kit is Bolton's top kit for total compatibility, with complete carrier coverage (AT&T, Verizon, T-Mobile, US Cellular and more) across any device. The omni antenna will gather signal from all carriers rather than focusing in on a single one, and the Victory booster will balance all incoming cellular signals, ensuring consistent uptime and peak performance no matter the signal environment.
About the Bolton Victory Omni/Panel Kit
The Bolton Victory Signal Booster was designed by Bolton Technical as a budget-friendly answer for bringing signal to your home or office. The kit includes a signal booster, an outdoor antenna, an indoor antenna, as well as everything you need to set them up.
The Bolton Victory Signal booster offers up to +72 dB of gain under the best conditions. It is customizable, easy to use, and simple to install. The dials on the front allow you to set the gain and frequency for best results. It greatly enhances 4G LTE for all carriers, across all devices. It is also 5G ready.
The outdoor All Rounder Omnidirectional antenna by Bolton Technical draws in signal from 360 degrees. This is the common antenna that you can spot in cities, towns, and rural areas all over the country. It is really easy to install as it doesn't need to be directed at any particular tower. With a max gain of +4 dBi it is guaranteed to be the perfect all-round partner for the Bolton Victory.
This kit comes with an Indoor Board wall-mounted panel antenna. The antenna is designed to be discreet and powerful enough to deliver good signal to inside devices. Its beam of 60 to 75 degrees is wide enough to cover a good sized room or small cabin with up to +8 dB of gain.
To round this collection off, we have added 70 ft of cable and a connector. Everything you need to quickly set up for great signal. This kit is designed for quick install and several nearby towers.
- +72 dB Bolton Victory home signal booster
- +4 dBi outdoor antenna
- +8 dBi indoor antenna
- Better data speeds and less dropped calls
- Boost 4G LTE across up to 4,000 square feet
- 5G ready
- Easy installation
- Complete kit
How It Works
The Bolton Victory signal booster kit amplifies existing outdoor signal indoors.
- The outdoor antenna draws in existing cell signal
- The signal is sent via cables to the signal booster or cellular amplifier
- The signal is then sent to the indoor antenna which broadcasts it across your space
Who Is It For?
- Midsize homes or offices with weaker outside signal
- Urban cabins
- Small businesses
- Motorhomes
Kit Includes
- Bolton Victory Home Booster
- Outside Omni Antenna "All Rounder" 50 Ohm Part #BT512372
- Inside Panel Antenna "Indoor Board" 50 Ohm - N-Female Part #BT512501
- Power Supply Part #BT459792
- 50 ft RG6 Cable - White Jacket - F-Male to F-Male (Outdoor) Part #SC-RG6-50
- 20 ft BT240 Cable - White Jacket - N-Male to N-Male (Indoor) Part #SC-004-20-NN
- Connector: F-Female to N-Male Part #BT512020
Technical Specifications
| BOOSTER STUFF | |||
|---|---|---|---|
| Uplink (MHz) | 698-716 776-787 824-849 1710-1755 1850-1915 |
||
| Downlink (MHz) | 728-746 746-757 869-894 1930-1995 2110-2155 |
||
| Input/Output Impedance | 75 Ohm in / 50 Ohm out | ||
| Maximum Gain | 72 dB | ||
| Max Uplink Power | 26 dBm | ||
| VSWR | ≤2.0 | ||
| Gain Adjustment | 20 dB (Automatic) | ||
| Cable | RG6 (50 ft.) | ||
| RF Connectors | F Female (Outside) N Female (Inside) |
||
| Power Consumption | <15W | ||
| Dimensions | 7.875 x 5 x 1.188 inches | ||
| Weight | 2 lb 3 oz. | ||
| AC Power | Input AC 110V, 60 Hz Output DC 5-15V |
||
| Cable | RG6 / SC-240 | ||
| Maximum Output Power | 1 Watt EIRP | ||
| Noise Figure | 8 dB | ||
| FCC NOTICE | This is a CONSUMER device. BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider's consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person. You MUST cease operating this device immediately if requested by FCC or a licensed wireless service provider. | ||
| WARNING: California's Proposition 65 | This product can expose you to chemicals including Nickel (Metallic) which is known to the State of California to cause cancer and Bisphenol A (BPA) which is known to the State of California to cause birth defects or other reproductive harm. For more information go to https://www.p65warnings.ca.gov/. | ||
Installation
The most complicated part is installing the outdoor All Rounder omni antenna. To do this you need to climb up onto the roof or highest point and find the area of best signal. Make sure you have a ladder, some tools like a screwdriver and an adjustable wrench, and you’re good to go. Bolton Technical has a team of install pro’s ready to help you out if you need it.
-
1. Find The Best Outside Signal:
First find the best signal INSIDE your home. You can use your cell phone and a good app like Network Cell Info Lite or Open Signal. You can also use the field test mode if you have an Android, and some iPhones. This is an essential step as it will give you the best performance for your booster kit. -
2. Install Outside Antenna
Once you know where the best signal is, you can install the outside antenna. Place it as high up as you can, on a roof or gable. Use a mounting pole to get better height. -
3. Connect to Amplifier
Use the included cable to connect the outdoor antenna to the amplifier. Make sure you put the amplifier in a well-ventilated area. -
4. Install Inside Antenna
Mount the indoor panel antenna in the room where you want your signal to be strongest. Put it higher up on a wall. Run the cable from the antenna to the amplifier. Make sure there is at least 20 feet vertical or 50 feet horizontal distance between the two antennas, and the antenna and booster. -
5. Power on
Plug the amplifier into the wall and turn it on. The Victory will sync up to the antennas and show a yellow LED. Set the gain on your dial to maximum for best results. -
Technical Support & Troubleshooting
If you need help setting up your amplifier system and troubleshooting support: our trained product specialists can assist. Just call us at 1-800-470-6777 or email sales@signalboosters.com
Frequently Asked Questions
How Many Cellular Devices Can I connect to the Bolton Victory at once?
The Victory supports several devices, but we recommend no more than 8 at a time.
Can I use the Bolton Victory inside of an apartment or multi-family housing unit like a condo or townhome?
Yes, although you will need to mount the outdoor antenna on a roof and run a cable to your apartment.
Do I need cell signal for the Victory to work?
Yes. For any signal booster to work you need at least one bar of outside signal.
Does the Victory boost 5G?
The Victory is 5G ready, which means that it can boost data up to 5G speeds. It is future-proof and will work with new technologies.
What do I do if my signal doesn’t improve with the Bolton Victory kit?
Firstly, make sure your indoor and outdoor antennas are far enough away from each other. If that still doesn’t work, make sure all your cables are connected properly. Make sure there is enough signal where your outdoor antenna is set up. If there is still no boosted signal give us a call on 1-800-470-6777 or email sales@signalboosters.com.