Find the Right Signal Booster for You
Answer a few questions and we'll recommend the best solution to solve your cell signal problems.
FREE Standard Shipping*
Read Featured Reviews From Actual Customers Read All Reviews
Boost Cell Signal for Any Truck, Semi, or Marine vehicle
We designed the Bolton Velocity Trucker to meet the needs of those always on the road or at sea. That’s why we’ve included the powerful Blade OTR 5G antenna – to provide the greatest possible gain, even in the most remote locations. Perfect for any long-haul trucker, overland enthusiast, or offshore sailor.
Powerful +50 dB Gain
The Bolton Velocity stands among the most powerful vehicle boosters on the market. Its massive +50 dB gain will ensure that it boosts reception to your phone even with weak outside signal. Haul cross-country or sail along the coast discovering untold adventures, never losing reception.
Meet the Bolton Blade OTR Antenna
Our Blades are sharp. The Bolton Blade is the most powerful, durable OTR vehicle antenna on the market. It’s rust and wear resistant, with a sturdy mast. Most importantly, it sacrifices nothing when it comes to boosting cell signal: at up to +4.4 dB of gain across all 5G and 4G frequencies, the Blade is more than capable of meeting any signal challenges your rig faces.
5G Ready
The Bolton Velocity Vehicle booster kit boosts 5G and 4G even in remote areas. If there is any signal outside, it will amplify it.
Easy Setup, Incredible Gain
Installing the Velocity trucker cell signal booster kit is simple. Place the booster under a seat or anywhere else in your cabin. It needs to be in a well-ventilated area. Plug the provided cable from the antenna into the booster and then to the inside antenna. And that's it!
About the Bolton Velocity Trucker Kit
The Bolton Velocity Trucker cell signal kit has everything you need to connect any vehicle to great signal on the go. Install it in your SUV, minivan, truck or even hatchback in a few simple steps. Cruise the country with peace of mind that you have good reception no matter where you go.
The Bolton Velocity vehicle booster has a maximum gain of +50 dB. This is the most allowed by the FCC in the US. The Velocity boosts 4G LTE across the country and is also 5G ready.
The Bolton Blade 5G OTR antenna provides the highest gain and greatest durability of all our vehicle antennas. It will stand up to the rigors of the road and provides the best possible performance – the added gain allows you to roam even farther from your nearest cell tower.
Installing the whole kit is as simple as securing the mirror mount, screwing in the Blade outside antenna, running the cable to your Velocity booster, installing it under your seat or in your console, and connecting it to your inside antenna. Everything you need is included in the kit. No mess, no hassles, no extra wires.
- +50 dB Bolton Velocity signal booster
- +4.4 max dBi gain Blade OTR 5G antenna
- Better data speeds and less dropped calls
- Boost 4G LTE on the go to all vehicles
- 5G ready
- Easy install
- Complete kit
How It Works
The Bolton Velocity signal booster kit amplifies existing outdoor signal inside your vehicle.
- The outdoor antenna draws in existing cell signal
- The signal is sent via cables to the signal booster or cellular amplifier
- The signal is then sent to the inside antenna which broadcasts into the cabin of your vehicle
Who Is It For?
- Trucks
- Semis
- Boats
- Yachts
- Schooner
- Overland Vehicles
- Fleet Vehicles
- Vans
Kit Includes
- Bolton Velocity Vehicle Booster Part # BT459624
- Outside Blade Antenna w/ Mirror Mount Kit Part # BT151908
- Inside Flat Antenna - FMEBT459679 Part # BT459679
- Accessory Mounting Packet
- Power Supply Part #BT459815
- Adapter FME-Female to SMA-Female Part # BT512037
- Power Supply-DC Part # BT459815
Technical Specifications
| Bolton Velocity Vehicle Kit | |||
|---|---|---|---|
| Uplink (MHz) | 698-716 776-787 824-849 1710-1755 1850-1915 |
||
| Downlink (MHz) | 728-746 746-757 869-894 1930-1995 2110-2155 |
||
| Input/Output Impedance | 50 Ohm | ||
| Maximum Gain | 50 dB | ||
| Max Uplink Power | 29 dBm | ||
| Noise Figure | ≤5 dB | ||
| VSWR | ≤2.0 | ||
| Gain Adjustment | 20 dB (Automatic) | ||
| Maximum Output Power | 1 Watt EIRP | ||
| Cable Type Outside | RG-58U | ||
| Cable Type Inside | SC-174 | ||
| Outside NMO Antenna Cable | 17 feet | ||
| Inside Patch Antenna Cable | 10 feet | ||
| Hardwire Power Supply Cable | 18 feet | ||
| RF Connectors | FME male (both ends) | ||
| Power Consumption | <10W | ||
| Dimensions | 6.58" x 4" x 1.125" | ||
| Weight | 1.43 lbs | ||
| FCC NOTICE | This is a CONSUMER device. BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider's consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person. You MUST cease operating this device immediately if requested by FCC or a licensed wireless service provider. | ||
| WARNING: California's Proposition 65 | This product can expose you to chemicals including Nickel (Metallic) which is known to the State of California to cause cancer and Bisphenol A (BPA) which is known to the State of California to cause birth defects or other reproductive harm. For more information go to https://www.p65warnings.ca.gov/. | ||
Installation
-
Step 1. Mount Blade Antenna
Once you have determined the mounting location, assemble the antenna parts by routing the cable through the cable exit quick disconnect. If using the provided mounting bracket, we recommend installing the spring base and mounting bracket before adding the remaining assembly.
Install Mounting Bracket
1) Secure bracket to vehicle rail using provided hardware. Secure all four bolts in place and tighten with a wrench.
2) Attach the Dome mount to the bracket, securing with wrench
3) (Optional) Attach spring or 90-degree layover mount
4) Attach Blade OTR antenna to dome mount, screwing in tightly
5) Connect SMA-cable
Route Cable
Route cable from outside to the inside of the cabin behind a door seal where your booster will be located. -
Step 2: Install Inside Flat Antenna
Identify a location for the inside antenna or near your front dashboard that is:
1) Within 2-3 ft of the most common cell phone location
2) At least 8 inches from cellular devices
3) At least 4 inches from metal
Next, peel the Velcro backing and apply to a clean dry surface in your chosen location.
Or, use the free vent clip provided by with your product as a mounting surface then clip it to the air vent. -
Step 3: Place Booster and Connect Cables
Select a well-ventilated area away from excessive heat, direct sunlight, and moisture. We usually recommend installing the booster under a seat or within the front console.
Connect the cable from the outside antenna to the connection marked OUTSIDE and connect the cable from inside flat antenna to the connection marked INSIDE. Tighten the connections and wrap up any loose cable. You may need to use the included adapters to connect the cables properly.
NOTE: Included adapters may be needed to connect cable to booster. -
4. Connect Power
Connect the power cord connector to the signal booster and insert the other end into your cigarette lighter adapter. The Power LED illuminates to show the signal booster is ready for use. The Alert LEDs flash 5 times to show the frequency band is operational.
Note: When your vehicle is off, turn the power switch to OFF to keep the booster from continuing to draw power from your vehicle.
Frequently Asked Questions
Does the Velocity boost 5G?
The Velocity is 5G ready, which means that it can boost data up to 5G speeds. It is future-proof and will work with new technologies. The Blade OTR antenna is 100% 5G capable, and can capture low and mid-band 5G signal across all carriers.
Does the Velocity work when the vehicle is turned off?
As the Velocity works via the cigarette lighter in your vehicle, it will differ from truck to truck. Some vehicles will power the booster with the ignition on, while some will work even with the car completely off. To avoid draining your car battery, we recommend turning the power switch to OFF.
Do I need cell signal for the Velocity to work?
Yes. For any signal booster to work you need at least one bar of outside signal.
What's the difference between the different Velocity kits?
Each Velocity kit comes with a different set of antennas. The standard kit (BT459624-M) has a Mighty Mag magnet mount antenna and an inside flat panel antenna. This trucker kit (BT459624-T) has an outside Blade antenna and an inside flat panel antenna. The RV kit (BT459624-RV) has an outside Blade antenna and an inside whip antenna.
What do I do if my signal doesn’t improve with the Bolton Velocity kit?
Firstly, make sure your inside and booster are far enough away from each other. If that still doesn’t work, make sure all your cables are connected properly. Make sure there is enough signal where your outdoor antenna is set up. If there is still no boosted signal give us a call on 1-800-470-6777 or email sales@signalboosters.com.